MIDNITE SOLAR MNPV6-DISCO DISCONNECT/COMBINER FOR SOLAR, WIND TURBINE/GENERATOR

Description

MIDNITE SOLAR MNPV6-DISCO DISCONNECT/COMBINER FOR SOLAR, WIND TURBINE/GENERATOR
Midnite Solar MNPV-DISCO
MNPV Disconnecting Combiner Box
MNPV6 DISCO COMBINER
Please Note: This is an enclosure only, circuit breakers must be purchased separately.
The MNPV6 Disco combiner is rated for outdoor use. Designed for combining a max of 6 PV strings rated up to 150VDC, 120 amps total output.
The MNPV6 Disco is very flexible. It is ETL listed for AC and DC this allows you to configure it for several different uses. It will work with 1-6 din rail mount, 150V DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect you can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick.
Features
Convenient disconnect handle
All aluminum powder coated housing that won’t rust
Flip up cover that can stay in the open position during installation
PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
Standard din rail to mount up to 6, 150V breakers
120 Amp tin plated copper bus bar to combine breaker outputs - bus bar may be split in two
Dead front cover snaps into place after wiring is complete for safety
Applications
PV combiner up to six strings using MNEPV 150 VDC breakers with the MNPV6 Disco
AC Combiner for up to three strings for use with micro inverters using MNEAC 240 VAC Breakers
DC load center using MNPV breakers
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
Payment
Shipping
Returns
Payment
Shipping
Returns
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
See our other items
Thank you for visiting our Ebay store!
Midnite Solar MNPV-DISCO MNPV Disconnecting Combiner Box MNPV6 DISCO COMBINER Please Note: This is an enclosure only, circuit breakers must be purchased separately. The MNPV6 Disco combiner is rated for outdoor use. Designed for combining a max of 6 PV strings rated up to 150VDC, 120 amps total output. The MNPV6 Disco is very flexible. It is ETL listed for AC and DC this allows you to configure it for several different uses. It will work with 1-6 din rail mount, 150V DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect you can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick. Features ---Convenient disconnect handle ---All aluminum powder coated housing that won’t rust ---Flip up cover that can stay in the open position during installation ---PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14) ---PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14) ---Standard din rail to mount up to 6, 150V breakers ---120 Amp tin plated copper bus bar to combine breaker outputs - bus bar may be split in two ---Dead front cover snaps into place after wiring is complete for safety Applications ---PV combiner up to six strings using MNEPV 150 VDC breakers with the MNPV6 Disco ---AC Combiner for up to three strings for use with micro inverters using MNEAC 240 VAC Breakers ---DC load center using MNPV breakers
MIDNITE SOLAR MNPV6-DISCO DISCONNECT/COMBINER FOR SOLAR, WIND TURBINE/GENERATOR
Midnite Solar MNPV-DISCO
MNPV Disconnecting Combiner Box
MNPV6 DISCO COMBINER
Please Note: This is an enclosure only, circuit breakers must be purchased separately.
The MNPV6 Disco combiner is rated for outdoor use. Designed for combining a max of 6 PV strings rated up to 150VDC, 120 amps total output.
The MNPV6 Disco is very flexible. It is ETL listed for AC and DC this allows you to configure it for several different uses. It will work with 1-6 din rail mount, 150V DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect you can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick.
Features
Convenient disconnect handle
All aluminum powder coated housing that won’t rust
Flip up cover that can stay in the open position during installation
PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
Standard din rail to mount up to 6, 150V breakers
120 Amp tin plated copper bus bar to combine breaker outputs - bus bar may be split in two
Dead front cover snaps into place after wiring is complete for safety
Applications
PV combiner up to six strings using MNEPV 150 VDC breakers with the MNPV6 Disco
AC Combiner for up to three strings for use with micro inverters using MNEAC 240 VAC Breakers
DC load center using MNPV breakers
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
See our other items
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Shipping
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Thank you for visiting our Ebay store!
Midnite Solar MNPV-DISCO
MNPV Disconnecting Combiner Box
MNPV6 DISCO COMBINER
Please Note: This is an enclosure only, circuit breakers must be purchased separately.
The MNPV6 Disco combiner is rated for outdoor use. Designed for combining a max of 6 PV strings rated up to 150VDC, 120 amps total output.
The MNPV6 Disco is very flexible. It is ETL listed for AC and DC this allows you to configure it for several different uses. It will work with 1-6 din rail mount, 150V DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect you can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick.
Features
Convenient disconnect handle
All aluminum powder coated housing that won’t rust
Flip up cover that can stay in the open position during installation
PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
Standard din rail to mount up to 6, 150V breakers
120 Amp tin plated copper bus bar to combine breaker outputs - bus bar may be split in two
Dead front cover snaps into place after wiring is complete for safety
Applications
PV combiner up to six strings using MNEPV 150 VDC breakers with the MNPV6 Disco
AC Combiner for up to three strings for use with micro inverters using MNEAC 240 VAC Breakers
DC load center using MNPV breakers